Notes - Material

Metals
Metals are used by the process of casting or molding. Sheets and wires of metals can easily be drawn due to the malleable and ductile quality and finds high application in the art and crafts.

Brass
Brass is a great metal to cast with as it can provide some really great looking results. The low melting point makes brass a really great material for metal casting since even the smaller home grown furnaces can be used. By adding and subtracting alloys from bronze one can successfully make hard or soft bronzes. Aluminum and tin are sometimes added to bronze to create a layer that is not corrosive and very durable. Of course, for the home foundry users, playing alchemist isn’t really an option or necessary and scrap brass is perfectly acceptable in many cases. Locating scrap pieces of brass should be sufficient enough for whatever project you have in mind. Due to brass’ gleam and yellow shine, many artists will use the alloy for sculptures, jewelry, and other decorative items.

Brass casting, as the name suggests, involves the use of brass as the molten metal. Brass casting can be carried out by the way of sand casting only. Sand casting can be defined as a ‘cast part’ produced by formation of a mold from a mixture of sand and pouring the casting liquid (mostly molten metal) into mold. Then the air-cooling of the mold takes place. After the solidification of metal, the removal of mold takes place. The metal used here is brass. It is a known fact that brass is an alloy of copper and zinc. Hence, to be precise, the molten metal consists of two elements.

Brass casting methodsGenerally there are three casting methods that prove to be suitable for brass casting. Metal casters may choose to experiment with different methods and should not allow themselves to be limited.

Lost Wax casting is usually associated with bronze casting but can also be used for brass and for really any other metal. By using a wax model and covering it with a ceramic shell, artisans are able to inject the molten alloy which replaces the wax. Chipping away the shell will reveal the brass piece.
Lost wax casting is used when a high attention to detail is needed. Artists or metal casters looking to create decorative brass pieces or sculptures will find that the lost wax casting technique will meet their needs far better than other techniques and methods.

Sand casting is probably the oldest type of casting and is still a popular method especially for small foundries. The brass is poured into sand molds and can create a unique look which may be preferred for the artisans. Sand casting tends to be the most economically sensible for small foundries.